FST phenolic joint bearing

Features: low friction coefficient, high operating speed, wear resistance, impact resistance, shock absorption, good toughness

Structure: Our company has jointly developed a lubrication formula system with phenolic manufacturers. This series of products is wear-resistant as a whole, and both the inner and outer diameters can be machined to achieve excellent application accuracy, roundness, and cylindricity tolerances.

Substrate: Customized phenolic system and polymer material fibers.

Application: shipbuilding, maritime machinery equipment, water conservancy machinery equipment, self-lubricating maintenance free equipment, marine marine platform shaft sleeves, automation equipment, etc.

Mechanical and physical performance unit values

Ultimate compressive strength Mpa 380

Maximum load (static) Mpa 154

Maximum load (dynamic) Mpa 102

Temperature range: ° C -55 to 130

Hardness Shore D>96

Thermal conductivity W/m-k 0.26-0.33

Water absorption rate of 0.15% in 2 hours

Water absorption rate of 0.20% after 24 hours

Density g/cm3 1.25

Maximum sliding speed m/s 0.13

Maximum PV value Mpa.m/s 0.88

Friction coefficient (dry friction) f 0.10-0.18

Typical average design pressure for high proportion applications Mpa 34

Thickness of wear-resistant layer mm, overall wear-resistant